最好看的中文字幕MV电影,最好看的2018免费观看在线,最好的2019中文大全在线观看,最好看的2019年中文视频,最好看的HD高清电影,最好看的电影2019中文字幕

Welcome to Da Bai Electronic Technology (Shanghai) Co., Ltd.
Position
Home > News > Industry news
Huichuan frequency converter MD520 keeps displaying - H-C - fault when powered on
2025/5/5 21:29:34

Huichuan frequency converter MD520 keeps displaying - H-C - fault solution when powered on
The reasons for the continuous display of - H-C - fault on the Huichuan frequency converter MD520 during power on may include the following:
Power on self-test failed: It may be due to the inverter failing the power on self-test, resulting in the display of - H-C -. This may be caused by issues with the input power supply, poor contact of the 8-core ribbon cable connecting the driver board and control board, or damage to internal components of the frequency converter
Fan damage or stalling: The frequency converter displays "HC" and immediately shuts down after operation, which may be caused by fan damage or stalling. In this case, it is necessary to replace the fan
The methods to solve these problems include:
Check input power supply: Ensure that the input power supply of the frequency converter is connected normally and there is no short circuit or open circuit.
Re plug and unplug the 8-core ribbon cable: Check if the 8-core ribbon cable connecting the driver board and control board is in good contact, and if necessary, re plug and unplug the ribbon cable.
Replace fan: If the problem is caused by fan damage or blockage, the fan needs to be replaced.
Seeking manufacturer service: If the above methods cannot solve the problem, it is recommended to contact the manufacturer for professional repair services
Preventive measures and suggestions:
Regular maintenance: Regularly inspect all components of the frequency converter, especially the fan and connecting wires, to ensure their normal operation.
Avoid overload: Avoid overloading during use to reduce the risk of component damage.
Professional maintenance: Regularly invite professional personnel to conduct maintenance checks to ensure the long-term stable operation of the frequency converter.
1. Fault phenomenon: 2. Solution:
Poor contact of the wiring between the driver board and the control board. Re plug and unplug the 8-core and 28 core cables
Seeking manufacturer's service for damaged components on the control board
Motor or motor wire has a short circuit to ground
Hall fault
The voltage of the power grid is too low

Scan QR codeClose
欢迎光临: 金山区| 明水县| 柘城县| 曲水县| 玉溪市| 甘洛县| 梅州市| 丰镇市| 新兴县| 苗栗县| 阜宁县| 安化县| 西畴县| 建水县| 平舆县| 宝坻区| 调兵山市| 淮北市| 图们市| 湖口县| 阜南县| 普兰店市| 宁晋县| 新龙县| 玉门市| 施秉县| 三门县| 阿城市| 曲靖市| 庆安县| 肥东县| 德钦县| 肃宁县| 长岛县| 赤壁市| 儋州市| 海南省| 南充市| 息烽县| 河池市| 醴陵市|